큐오샵 음악인들의 선물가게



CL 1B OPTO COMPRESSOR


 


CL1B: 업계 표준 보컬 컴프레서 (The Industry Standard Vocal Compressor!)

The TUBE-TECH CL 1B 는 all-tube optical mono compressor 입니다. 

극단적인 세팅이나 상황에서도 음악적인 표현과 매끄럽고 섬세한 컴프레싱을 보여주는 옵토(광학) 방식의 컴프레서 입니다.

사용 방식도 매우 직관적이고 편리하여 효율적인 업무 프로세스를 구성할 수 있습니다.

CL1B 가  TUBE-TECH unit 중 가장 인기 있는 이유는 보컬이면 보컬, 악기면 악기, 특정장르면 장르에 상관없이 매우 고급스럽고 부드러운 컴프레싱과 음악적 표현을 하기 때문입니다 

먹먹함이나 왜곡이 없이 고음질을 유지하면서도 음악적인표현이 고급 스럽기 때문입니다.

CL1B 는 사용법도 매우 쉽다는 것이 장점입니다.

심지어 초보자가 사용하더라도 좋은 사운드를 얻는 데는 큰 노력이 필요하지 않습니다.

이미 업계 표준 장비로서 사용법이 많이 공개되어 있어서 그대로 따라하기만 해도 수준급의 사운드를 구현 할 수가 있어서 가장 실패가 없는 장비중에 하나 입니다.

이미 그 사운드와 성능은 유명한 레전드급 음반에서 증명이 되었습니다.

헤아릴 수도 없이 많은 스튜디오, 엔지니어, 뮤지션들이 사용하여 수백만장이 팔리는 음반에 자주 사용 되었습니다.

CL1B 는 누구에게나 비밀 병기가 될 수 있습니다.

 

기능과 기술 사양

 


The TUBE-TECH CL 1B Compressor is an optical, all tube based compressor. The unit features a gain-reduction element, positioned immediately after the input transformer. It is controlled by the sidechain amplifier, which also contain the two time control circuits – one for fixed and one for variable Attack/Release. The two time-controllers can either be used separately or combined. This circuit contains semiconductor OP-amps for the entire control.A dedicated Bus selector with three positions (Off, Bus 1, Bus 2) is used whenever you want to link several compressors together.

The gain-reduction element is followed by a tube-based push-pull amplifier with variable gain up to 30 dB. Input and output transformers have a static-screen between the primary and secondary wirings. Both Input and Output are balanced as well as fully floating.

  • Unique, low-distortion optical gain reduction element
  • All-tube based push-pull amplifier
  • Frequency response @ -3 dB: 5 Hz to 25 kHz
  • Low noise: < -75 dBU @ 30 dB gain
  • CMRR: > 60 dB @ 10 kHz
  • Variable ratio from 2:1 to 10:1
  • Continuously variable attack and release times
  • Output gain: Off to +30 dBU
  • Variable threshold: Off to -40 dBU
  • Input impedance: 600Ω
  • Interconnection of several compressors via two busses
  • VU meter shows input, compression or output
  • Clickless In/Out switch
  • Conductive plastic potentiometers
  • Input and output are transformer balanced and fully floating

 

FAQ 자주 묻는 질문 : Opto Compressors CL 1A 와 CL 1B 의 차이점

  • 회로 설계와 기능은 완전히 동일 합니다. The amplifier section in the CL 1A is hardwired.
  • CL 1B 안에 트랜스포머들과 진공관들은 회로 기판 안쪽에 잘 장착되어 있습니다. The control circuit is on a PCB in both units.